| Home |
| 1000
Watt RF Generator (HIFU) |
| RF Power Fuse |
| Transducer Matching Network |
| HIFU Work Station |
|
>> Additional Accessories
|
Additional Accessories
For Use With JJ&A HIFU Products
| PM-1000 Power Meter | Pulse power and SWR monitoring module. Measures SWR (Standing Wave Ratio), forward power, and reflected power in either CW or Pulse modes. Very unique in that it will function properly with fast pulses. Information is sent back to the user via standard USB interface. This information can be used to halt the power generator if a high SWR condition suddenly exists. |
| DDL-1000 Digital Dummy Load | Combination dummy load and power sensor with USB port. Useful for dry runs and diagnostics. Use to confirm that proper power levels are set. |
| RX-1 Receiver | Used to present baseband I and Q (In phase and Quadrature) output signals for signal analysis. Receiver locks onto transmitting frequency and IQ outputs show phase information of received signal. Analog outputs, ready for any -5 to +5 volt digitizer. |
| CIRC-1000 Circulator | Used to isolate transmitted and received signals, or can be used alone as a Transmit/Receive switch. |
| FS-1 Foot Switch | Accessory for use during experiments to control when the power generators are on. |